Arctic Start AR800-S “stand alone”


/ Extended Range

The 800 features AM transmitter technology for up to 1000 feet of range, more than 3x the distance of conventional vehicle remotes.

/ Compact Design

When size matters, the 800 is a small remote measuring just 2 inches at its greatest length.

/ ArcticBlue LED

Bright LED visually indicates the command has been sent from the remote.

What’s Inside

Two (2) Arctic Start 800 remote
Two (2) A23S batteries
Two (2) metal link keychain
Owner’s manual

CM800-S control module (for remote start)
CS800 Basic wire bundle

Warranty Information
User Guide


Remotes: (2) 4-button LED remotes. Operates at 433MHz AM frequency. LED remote requires (1) A23S battery (included). System is capable of communication between 4 remotes maximum.
Control Module: iDatalink and Fortin bypass compatible. 12-pin primary harness.
System: Tachometer sensing, voltage sensing (“tachless”), self-crank, and alternator engine sensing methods. Trigger start input plus temperature activated rear defrost output.
Compatibility: ADS iDatalink and Fortin bypass modules for maximum vehicle compatibility.

Ignition Controlled Door Locks (“Drive-Lock”):Automatic door lock activation after system acknowledges vehicle is in motion. Dual program options include activation through foot-brake depress or activation through RPM sensing.
Diesel Mode: Automatic engine start activation after system acknowledges diesel engine is ready to start. System programmable options compatible with wire and delayed starting for variety of vehicle applications.

Interval Start: Automatic engine start activation at timed intervals. System programmable interval options include 1.5h and 3h with 4m (8m diesel) run-time. Feature is user enabled/disabled from programmed remotes.
RS Run-Time: System programmable engine run-time options. Includes 3m/15m/25m/45m.
Starter-Interrupt: Automatic engine start prevention after system acknowledges unauthorized access.
Valet: Restricts access to all system features other than door lock/unlock. Feature is user enabled/disabled from programmed remotes.